Buckets & Cups

Info

Maximize your spring tuning capabilities with these adjustable spring shims. Extended-style for use with shorter springs. Threaded steel two-piece design. Adjust the shim to where you want and then spot weld it.

Features a 2-7/8" center hole to allow use with stock style shocks. Can be used with either 5" or 5-1/2" diameter springs.

Item Details

Extends 3-1/8" to 5-1/4"

Info

Rubber coil spring spacer for increasing spring load. A quick way to increase spring rate for fast or rough tracks. Works with 5" and 5.5" O.D. coil springs.

Spacer is 7/8" thick and 1" wide.

Our new swivel cups will keep your springs happy during travel by allowing rotation and angular alignment. They work with our hollow screw jacks or you can run them on a stud on the rear end. Instead of a bolted together combo, our cup comes off by simply pushing the SLIC pin. This Patented SLIC Pin technology makes spring changes a breeze. This part number is our 5" or 5-1/2" swivel 2-1/2" drop bearing cup 9" long 1" screw jack.
Recommended for Right front of you Modified. Also 9" long jack bolt is ideal to have enough length for the 2-1/2" drop and plenty of adjustment.

Our swivel cups will keep your springs happy when traveling by allowing rotation and angular alignment. This is our swivel cup 2-1/2" drop bearing design to help the car gain side bite.
Must use Wehrs jack bolt for this product to work properly.
Available for 5" and 5-1/2" Springs

Our new swivel cups will keep your springs happy when traveling by allowing rotation and angular alignment. They work with our hollow screw jacks or you can run on a stud on your axle in the rear.
-4" tall
-5" or 5-1/2" Springs

Our new swivel cups will keep your springs happy when traveling by allowing rotation and angular alignment. They work with our hollow screw jacks or you can run on a stud on your axle in the rear.
-2-1/2" tall
-5" or 5-1/2" springs

Our new swivel cups will keep your springs happy during travel by allowing rotation and angular alignment. They work with our hollow screw jacks or you can run them on a stud on the rearend. Instead of a bolted together combo, our cup comes off by simply pushing the SLIC pin. This Patented SLIC Pin technology makes spring changes a breeze
- 2-1/2" tall cup
- 6" jack bolt
- 5" or 5-1/2" spring size

Our new swivel cups will keep your springs happy during travel by allowing rotation and angular alignment. They work with our hollow screw jacks or you can run them on a stud on the rearend. Instead of a bolted together combo, our cup comes off by simply pushing the SLIC pin. This Patented SLIC Pin technology makes spring changes a breeze.
- 4" tall cup
- 6" long jack bolt
- 5" or 5-1/2" spring size

aterial Type: Steel
Sold in Quantity: Each
Finish: Painted
Color: Black
Notes: Will fit a spring with OD as large as 5" and ID as small as 3-3/8"
Tube O.D.: 3.00"
Overall Diameter: 5.00"
Outside Diameter: 3.30"
Material Thickness: .13"
MFG. Part #: 91720243
Info
Lower coil spring mount welds to 3" axle tube for mounting conventional 5" coil springs.