NGK Spark plugs, MSD Spark Plug Wires, Multi-Fire Spark Plug Wires
Item # PRS 547-35659The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.
Item # MFW WIRESLower resistant wires allow more current to the spark plug. More current = hotter spark = better fuel burn.
This set in particular is made to fit chevy small block engines. We can also customize your plug wires to certain lengths for big blocks & any other types of engines, or with straight boot. For special orders, call @ 620-431-6010
15 OHM per foot coil wire.
15 OHM per foot plug wires.
Ideal for crate engines.
Lowest resistance of any spark plug wire package on the market.
Wires come complete with double heat shrunk H.E.I. ends along with 100% silicone insulation good to temperatures up to 1200 degrees F.
Dyno testing with a 604 crate motor has shown average gains of 9 hp with this package compared to standard 300 OHM wires from competitors.
For the best results, use with the "blaster HVC Coil" (Part # 021 8252)
NOTE: Ground the heads when running these wires.
TIPS WHEN ORDERING:
H.E.I. ends are what would be on your MSD billet distributor and/or MSD Blaster HVC coil.
"Socket" ends would be used for an MSD Blaster 2 coil. SKU: 021 8202